Resolutions up to 4K60 (4:4:4) Independent digital audio routing Step–In over HDMI Active source detection for priority, last–connected automatic and manual switching
User configured as encoder or decoder Max resolution — 4K@60Hz (4:4:4) Fully standard and compliant SDVoE codec. Streaming Support — Multicast, Unicast, RTP over RTSP Powered by the network (PoE) Video wall and multiview support
- 1:10 HDMI distributor - Up to 4K@60Hz (4:4:4) video resolution - Up to 17.82Gbps bandwidth - HDR10, HDCP 2.2 compliance
2x1 HDMI switchable Transmitter with Ethernet, RS–232 & IR over Extended–Reach HDBaseT
HDBaseT 1.0 switchable transmitter
Up to 130m (430ft) at 1080p
Up to 1080p@60Hz 36bpp video resolution
Ethernet & control signal extension
4–,8–,12 — &16–Input Modular MultiViewer
Modular Frame
Up to 4K@30Hz output resolution
Dual independent outputs
Multi-format input options
Advanced Audio Level Metering
4–20 Input Modular MultiViewer
Includes Redundant Power Supply
HDCP support
Tally Support
Browser set up and control
4–72 Input Modular MultiViewer
Multiple Time Zone Clocks
DynamicUMD
3G HD–SDI Multiviewer
Max. Data Rate — 3Gbps.
Multi-Standard — SDI, HD–SDI, 3G HD–SDI
Medically Certified
Kramer re–Klocking™ & Equalization
Control — Ethernet & RS–232.
4 Composite Video Picture–in–Picture Inserter
Multi-Standard — PAL & NTSC
No Format Conversion
Built-In ProcAmp Control — IR Remote, USB Mouse (with OSD), RS–232 & Ethernet.
Max Data Rate — 3Gbps Kramer Equalization & re–Klocking™ Input Cable Equalization Window & Image Scaling Independent Layer Transparency Control 16 Screen Layouts. Control — Ethernet & RS–232.
Kramer Premium / High–Speed HDMI Cable with Ethernet
K–Lock Connectors
Lengths — 0.9–19.8m (3–65ft)
Max. input resolution:4K@60 (4:4:4)
Max. data rate:18Gbps (6Gbps per graphic channel)
HDCP 2.2 & 1.4 compliant
USB–C and HDMI inputs, USB–C 60W charging
Analog audio embedding and de–embedding
OSD menu and front panel input selection
Computer Graphics Video & HDTV to HDMI ProScale™ Digital Scaler
Max. Resolution — WUXGA & 1080p
1 x 240W @ 70V/100V
2 x 120W @ 4/8 Ω
Line–level output
2ch Dante input & Stereo Line level input
Built–in DSP
Controllable via RS–232 and IP
Auto standby
1 x 120W @ 70V/100V
2 x 60W @ 4/8 Ω
4X4 Dante Interface
Volume Settings — Input gain/output volume per channel
Input Settings — DIP–switch input settings — line level (0db) or mic level (+20dB) with phantom +48 volts.
Control — Dante IP control matrix and Kramer Protocol 3000 Managed by Kramer Network
English
