Kramer Tavor 6-O 6.5–Inch, On–Wall 2–Way Powered Speakers
Indoor System
Woofer — 6.5"
Tweeter — 1"
Impedance — 4Ω
Freq — 50Hz to 20kHz
Volume Control
The Tavor 6−O is a pair of 6.5−inch powered two−way speakers designed for indoor wall mounting. The active speaker accepts a line−level stereo input and amplifies it using a built−in amplifier and outputs a speaker signal to the passive speaker.
- Active Loudspeaker — Stereo 2x50W RMS, 2x140W continuous program built–in power amplifier.
- Inputs — 1 unbalanced RCA, 1 unbalanced 3.5mm mini jack, 1 balanced on terminal block.
- Audio Level Controls — Volume, treble and bass.
- Magnetically Shielded.
- Enhanced Bass Reflex.
- Auto Power — Shuts off when system is not in use, indicated by a LED.
- Automatic Input Voltage Selector — 90 to 240V AC, 50 to 60Hz.
- Indoor Wall Mounting.
- Mounting Configuration — Active speaker: left, passive speaker: right.
- Weight (Single Speaker) — Active speaker 3.6kg (7.92lbs) approx., passive speaker 2.7kg (5.94lbs) approx.
- Package — 2 speakers (1 pair); 1 pair of U–shaped rotating mounting brackets with 4 mounting knobs; 4m (13.12ft) power cord; 4m (13.12ft) loudspeaker cable; 2m (6.6ft) 3.5mm to 2 RCA cable.
DESCRIPTION
2–way powered speaker
BUILT-IN POWER AMPLIFIER
2 X 50W RMS, 2 X 140W continuous program
FREQUENCY RESPONSE
45Hz to 20kHz @–10dB, 50Hz to 20kHz @±3dB
WOOFER
6.5” polypropylene cone with rubber edge woofer
TWEETER
1” silk dome tweeter
SENSITIVITY
85dB SPL, 1W@1m
MAX SPL
Continuous: 100dB, peak:108dB
POWER SOURCE
90–240V AC 50/60Hz
IMPEDANCE
4Ω
CROSSOVER FREQUENCY
8kHz
DIRECTIVITY FACTOR (Q)
7.5 averaged 1kHz to 10kHz
DIRECTIVITY INDEX (DI)
8.7dB averaged 1kHz to 10kHz
INPUT CONNECTORS
Line level unbalanced stereo audio on a 3.5mm mini jack, line level balanced stereo audio on a terminal block connector, line level unbalanced stereo audio on left and right RCA connectors
OUTPUT CONNECTORS
Speaker (to connect to the external passive speaker), 3.5mm mini jack line out for optional sub–woofer, 3.5mm mini jack loop output
DISPERSION COVERAGE
Vertical: 54 degrees @2000Hz, horizontal:65deg @2000Hz
DAMPING FACTOR
19 @4Ω/1000Hz
S/N RATIO
80–90dB
THD
≦0.15%
CONTROLS
Volume, bass and treble
INPUT POWER
ON or AUTO
STANDBY MODE POWER CONSUMPTION
0.5W
INPUT LEVEL FOR SYSTEM “WAKE-UP” FROM STANDBY MODE
12mV
MATERIALS
Aluminum grill, steel brackets, ABS cabinet
WEIGHT PER SINGLE SPEAKER
Active speaker: 3.6kg (7.93lbs) approx
PASSIVE SPEAKER
2.7kg (5.93lbs) approx
3.2kg (7.05lbs) approx
WEIGHT WITH MOUNTING KIT
Active speaker: 4.2kg (9.25lbs) approx
DIMENSIONS WITH MOUNTING BRACKETS
21cm x 25cm x 32cm (8.3” x9.8” x12.6”) W, D, H
INSTALLATION CLEARANCE
25cm (9.8”) — front panel to wall (with mounting bracket)
6.3cm (2.5”) — back panel to wall (with mounting bracket)
OPERATING TEMPERATURE
–15° to +70°C (5° to 158°F)
STORAGE TEMPERAURE
–30° to +55°C (–22° to 131°F)
HUMIDITY
25% to 90%, RHL non–condensing
ACCESSORIES
1 pair of U–shaped rotating mounting brackets with 4 mounting knobs, 4m (13.12ft) power cord, 4m (13.12ft) loudspeaker cable, 2m (6.6ft) 3.5mm to 2 RCA cable
COLORS
Available in black and white
Kramer PN-6P 6.5”, 2–way, Passive Pendant Speaker
6.5", 2–way, passive pendant speaker
Premium sound quality, high performance
Low–impedance (8Ω) / high–impedance (70V/100V)
Power ratings: 30W continuous / 45W peak
Nominal sensitivity: 90dB SPL
Maximum SPL: Continuous 105dB SPL / Peak 107dB SPL
UL1480A compliant for indoor installations
Kramer PN-6D 6.5”, 2-way, PoE powered Dante pendant speaker
Premium sound quality, high performance
Built–in amplifier, DSP, and Dante audio networking
Supports PoE++ / PoE+ / PoE (auto–negotiate)
Power handling: 10W continuous / 30W peak
Maximum SPL: Continuous 100dB SPL / Peak 105dB SPL
Supports AES67 streams when enabled in Dante Controller
Regulatory compliance: IEC62368(CB), CE LVD, UL62368–1, FCC/IC, BIS, RCM, RoHS, REACH, WEEE
Kramer CL-6P-LP Low Profile 6.5”, In–ceiling two–way closed back coaxial passive speaker
Low Profile 6.5”, 2–way coaxial passive ceiling speaker
Depth (ceiling clearance): 115mm / 4.53”
Low–impedance (8Ω) / high–impedance (70V/100V)
Power ratings: 30W continuous / 45W peak
Nominal sensitivity: 90dB SPL
Maximum SPL: Continuous 105dB SPL / Peak 107dB SPL
Plenum rated: UL 2043, UL 1480A
Kramer FC-404NETxl 4x4 Audio and Dante Mixer
4–port audio and 4–port Dante cross–connect mixer.
Individual media and service IP ports.
IP controlled and managed.
pcsoft@pcsoft.vn pcsoft@pcsoft.vn