L & R Level Controls
S/N Ratio — 80dB
The 105A is a high-performance distribution amplifier for unbalanced stereo audio signals. It takes one stereo input and distributes the signal to five identical stereo outputs.
INPUT
1 unbalanced stereo/balanced mono, 1Vpp/33kΩ on a 3.5mm mini jack
OUTPUTS
5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5mm mini jacks
MAX. OUTPUT
5Vpp
AUDIO BANDWIDTH (-3DB)
20kHz
S/N RATIO
80dB unweighted
CONTROL
Left and right gain rear trimmers (0 to +3.5dB)
COUPLING
AC
AUDIO THD + NOISE
0.03% (2nd harmonic)
POWER CONSUMPTION
12V DC, 100mA
INCLUDED ACCESSORIES
Power supply, mounting bracket
Kramer PN-6P 6.5”, 2–way, Passive Pendant Speaker
6.5", 2–way, passive pendant speaker
Premium sound quality, high performance
Low–impedance (8Ω) / high–impedance (70V/100V)
Power ratings: 30W continuous / 45W peak
Nominal sensitivity: 90dB SPL
Maximum SPL: Continuous 105dB SPL / Peak 107dB SPL
UL1480A compliant for indoor installations
Kramer PN-6D 6.5”, 2-way, PoE powered Dante pendant speaker
Premium sound quality, high performance
Built–in amplifier, DSP, and Dante audio networking
Supports PoE++ / PoE+ / PoE (auto–negotiate)
Power handling: 10W continuous / 30W peak
Maximum SPL: Continuous 100dB SPL / Peak 105dB SPL
Supports AES67 streams when enabled in Dante Controller
Regulatory compliance: IEC62368(CB), CE LVD, UL62368–1, FCC/IC, BIS, RCM, RoHS, REACH, WEEE
Kramer CL-6P-LP Low Profile 6.5”, In–ceiling two–way closed back coaxial passive speaker
Low Profile 6.5”, 2–way coaxial passive ceiling speaker
Depth (ceiling clearance): 115mm / 4.53”
Low–impedance (8Ω) / high–impedance (70V/100V)
Power ratings: 30W continuous / 45W peak
Nominal sensitivity: 90dB SPL
Maximum SPL: Continuous 105dB SPL / Peak 107dB SPL
Plenum rated: UL 2043, UL 1480A
Kramer FC-404NETxl 4x4 Audio and Dante Mixer
4–port audio and 4–port Dante cross–connect mixer.
Individual media and service IP ports.
IP controlled and managed.
pcsoft@pcsoft.vn pcsoft@pcsoft.vn