EXT3-C-XR-T 4K60 4:4:4 USB–C Transmitter with USB, Ethernet, RS–232, & IR over Extended–Reach HDBaseT 3.0
Uncompressed 4K@60Hz (4:4:4) HDMI & USB 2.0 extension
USB–C input with up to 60W charging
1Gbps Ethernet extension
Up to 100m (330ft) reach
PoE acceptor
EXT3−C−XR−T is a high−performance, extended−reach HDBaseT 3.0 transmitter, with a USB−C input, for 4K60Hz (4:4:4) HDMI, USB, Ethernet, RS−232, and IR signals over twisted pair. EXT3−C−XR−T transmitter converts all input signals into the transmitted HDBaseT 3.0 signal. It extends video signals to up 100m (330ft) over CAT copper cables at up to 4K@60Hz (4:4:4) video resolution.
- High Performance Standard Extender — Professional HDBaseT extender for providing extended–reach signals over twisted–pair copper infrastructures. EXT3–C–XR–T is a standard extender that can be connected to any market–available HDBaseT–compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
- BYOD Ease and Convenience — Connect any DP–Alt–Mode–capable USB–C device as an AV presentation source, while providing the connected device with USB 2.0 and Ethernet connection, and (if PD–2.0–capable) up to 60 watts of power, via a single USB–C cable connection only.
- Convenient Display Power On/Off Control — Simply press the DISPLAY ON button to toggle on and off the power of the remote CEC–enabled display; button LED indicates the power on/off status of the remote display.
- HDMI Signal Extension — Uncompressed 4K@60Hz (4:4:4) HDMI, HDCP 2.3, EDID and CEC signals are passed through from the source to the display.
- HDMI Support — Supports HDR10, deep color, x.v.Color™, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0.
- HDMI Mirroring — Transmitter mirrors input HDMI signal to loop the output port for connecting a local monitor or adding an additional unit in a daisy chain.
- Flexible USB 2.0 Extension — An active USB host is connected to the extender at either the transmitter or receiver sides. USB 2.0 signals are extended between the extender transmitter and receiver sides, enabling connection of the active USB host to both local and remote USB devices, such as camera and audio devices, or HID (Human Interface Devices) mouse or keyboard devices.
- I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID handling, processing, and pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems.
- Multi–channel Audio Transmission — Up to 32 channels of digital stereo uncompressed signals for supporting studio–grade surround sound.
- Ethernet Extension — Ethernet interface data flows in both directions allowing extension of up to 1 Gbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS–232 Extension — Serial interface data flows in both directions allowing data transmission and device control.
- Bidirectional Infrared Extension — IR interface data flows in both directions allowing remote control of peripheral devices located at either end of the extended line.
- Cost–effective Maintenance — Status LED indicators for HDMI, Loop, HDBT, and USB active host ports, facilitate easy local maintenance and troubleshooting.
- Easy and Elegant Installation — MegaTOOLS™ fan–less enclosure for dropped–ceiling mounting, or side–by–side mounting of 2 units in a 1U rack space with the recommended rack adapter.
INPUTS
1 DP Alt Mode & PD 3.0 USB-C: On a USB type–C female connector
OUTPUTS
1 HDBT: On an RJ–45 female connector
1 LOOP: On an HDMI female connector
PORTS
1 USB 2.0 Host: On a USB–B female connector
2 USB 2.0 Device: On USB type–A female connectors
1 1000BaseT Ethernet: On an RJ–45 female connector for LAN extension
1 IR: On a 3.5mm mini jack for IR extension
1 RS–232: On a 3–pin terminal block for serial extension
EXTENSION LINE
Reach: Up to 100m (330ft)
Note: When using Kramer HDBaseT cables
Standards Compliance: HDBaseT 3.0
VIDEO
Max Data Rate: 18Gbps bandwidth (6Gbps per graphic channel)
Max Resolution: 4K@60Hz (4:4:4) 24bpp resolution
Content Protection: HDCP 2.3
HDMI Support: 4K as specified in HDMI 2.0b
EXTENDED USB
Data Rate: Up to 480Mbps
Transmitted Data Bandwidth: Up to 300Mbps
Standards Compliance: 1.1 and 2.0 USB
EXTENDED ETHERNET
Max Data Rate: 1 Gbps
EXTENDED RS-232
Baud Rate: 300 to 115200
POWER
Power Adapter:
Source: 20V DC, 6A
Consumption: 20V DC, 4.35A
Max. Power: 88W
PoE
Consumption: 410mA
Max. Power: 19.7W
USB-C Charging
Max. Power: 60W
Compliance: PD 3.0
USB Device Charging
Max. Total Current: 2A
ENCLOSURE
Size: Mega Tools
Material: Aluminum
Cooling: Convection ventilation
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: –40° to +70°C (–40° to 158°F)
Humidity: 10% to 90%, RHL non–condensing
EXTENDED IR
Safety: CE
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Environmental: RoHs and WEEE
INCLUDED
USB–C 1m cable, power adapter, bracket, rubber feet
PRODUCT DIMENSIONS
19.00cm x 11.60cm x 2.70cm (7.48" x 4.57" x 1.06" ) W, D, H
PRODUCT WEIGHT
0.6kg (1.2lbs) approx.
Kramer EXT3-UE-R USB 2.0 and Ethernet PoC Receiver
4–port remote USB devices
Ethernet and audio extension
Up to 100m (330ft) CAT extension reach
Two–way PoC powering
Kramer EXT3-U-R USB Receiver
4–port remote USB devices
USB 2.0 100m (330ft) receiver
Two–way PoC powering
Compact
EXT3-21-XR-TR 2x1 4K60 HDMI/USB Switcher Extender over 100m HDBaseT 3.0
4K60 4:4:4 AV and USB coupled–signals switching and extension
Flexible — transmitter or Switcher Receiver
2–way PoE powering
Built–in intelligent control gateway
Secured remote control and management
Kramer 690R 2x3G SDI Receiver over Ultra–Reach SM Fiber
Range >6.2 miles (10km)
pcsoft@pcsoft.vn pcsoft@pcsoft.vn